Create a better tomorrow
National hotline:+86183-4889-9228
Current location:HOME > PRODUCTS > Masterbatch >

UV Masterbatch

TIME:2020-10-16 HOT:

Product introduction
UV Masterbatch
Parameters

UV Masterbatch
  Carrier   PP PE
LLDPE/LDPE/HDPE
  Induction time of oxidation OIT (200ºC)   30-1000min
  Pigment   Rutile titanium dioxide, Dupont titanium dioxide, Anatase titanium dioxide   Phase fusibility   PPR/PE/PP
  Rutile titanium dioxide content   70%   Pellets diameter (mm)   1.8-2.8
  Light and weather resistance   Grade 4-8   Density (g/cm³)   1.2-1.6
  Melt index  21.6KG/200ºC   10-30g/10min   Moisture content (%)   ≤0.05
  Melting point   140ºC-220ºC   Technical Specification   SGS, FDA, RoHS,  ISO9001


























Applications of white masterbatch:
 UV Masterbatch
Application Area:
 
1. PE/PP Injection Molding (Box, Containers, Chairs, Crates, Buckets, Battery, Cases, Hangers, Trash Can, Waste Bin, Bottle Cap, etc.)
2. PE/PP Extrusion Molding (Sheet, Pipe, Wire & Cable, Water Pipe, Water Supply Pipe, Drain Pipe etc.)
3. PE Blow Molding (Medical & Cosmetic container, Lubricant & Paint container, etc)
4. PE Film (Shopping Bags, Casting Film, Multilayer Film, Plastic Bag, Garbage Bag, Rubbish Bag, etc.)
5. PE Fiber (Carpet, Textiles, Upholstery, etc.)
 
Suggested Ratio: According to the customer's appearances, adjust the amount of additions. The company recommends adding 2% - 5% technology, 5% - 10% special products.